ZHUZHOU APPLE CARBIDE TOOLS CO.,LTD.
Zhuzhou Apple Carbide Tools Co.,LTD.
Add to Cart
DCMT11T3 Cnc Carbide Inserts CVD Coating For Steel Finishing And Semi Finishing
What is tungsten carbide inserts?
carbide cutters will leave a better surface finish on the part, and allow faster machining than high-speed steel or other tool steels.
Carbide tools can withstand higher temperatures at the cutter-workpiece interface than standard high-speed steel tools (which is a principal reason for the faster machining).
Carbide is usually superior for the cutting of tough materials such as carbon steel or stainless steel, as well as in situations where other cutting tools would wear away faster, such as high-quantity production runs.
Excellent chip control for steel machining . Provides perfect turning surface of the workpiece:
Models introduction for Steel machining:
| HF | HM |
| DCMT070202 | DCMT070204 |
| DCMT070204 | DCMT070208 |
| DCMT11T304 | DCMT11T304 |
| DCMT11T308 |
Different chipbreakers:
Grades recommendation:
| YC330 | For finish machining of steel at high speed | CVD coating |
| YC331 | The most versatility grade of steel processing | CVD coating |
| YC332 | For rough machining of steel parts | CVD coating |
Contrast Advantage/Benefits of choosing our carbide inserts:
1. High quality.
All the cutting tools quality meet the ISO international standard.
2. Good performance.
high strength and high hardness, hard-wearing.
3. Long tool life, higher production efficiency.
Long tool life means you need less time changing the inserts while machining. A reliable and safe performance every time.
4. Less tool breakage, cost down of each component
Saving costs and reducing the cost of each component to increase the profits .The high wear resistance makes the long tool life of the carbide inserts, which means you could saving more budget on purchasing the inserts.
Customer’s case: when a insert is failed on performance:
1. Flank Wear
-Workpiece material contains high hardness chemical elements (tool steel, die steel)
Increase cutting speed if abnormal flank wear is caused by a very slow cutting speed.
Solution: Reduce cutting speed or feed rate or use more wear resistant grade
2. Crater Wear
-Workpiece material contains high hardness chemical elements
Solution: Reduce cutting speed or feed rate or use more wear resistant grade
3. Cracking
-Excessive feed rates when interrupted cutting
Solution: Reduce feed rate, Use tougher grade
Quality control:
Technical support and after-sale service:
Our company can providing the following technical service for customers:
1: Small orders are acceptable for quick delivery and to help you reduce stock cost.
2: According to the workpiece design, material and CNC machine feed rate, cutting speed we can recommending a full set of practical scheme.
3: Suggsting more suitable model to replace the brands of Japan, Korea and so on.
4. Directly from factory to save your money.
Tool holder:
S08K-SDQCR/L07
S10K-SDQCR/L07
S12M-SDQCR/L07
S16Q-SDQCR/L07
S20Q-SDQCR/L11
S25R-SDQCR/L11
S32S-SDQCR/L11