ZHUZHOU APPLE CARBIDE TOOLS CO.,LTD.
Zhuzhou Apple Carbide Tools Co.,LTD.
Add to Cart
DCMT0702 Inner Turning Tungsten Inserts For Steel Machining , High Hardness
What is tungsten carbide inserts?
Carbide inserts are also used for roughing, finishing and metalworking, up to the toughest degree and material. We are partnered with high quality tungsten power and cemented-carbide mineral suppliers, which enables us to guarantee that each of our customers receive only the best tools to suit their very specific needs.
Excellent chip control for steel machining . Provides perfect turning surface of the workpiece:
Models introduction for Steel machining:
| HF | HM |
| DCMT070202 | DCMT070204 |
| DCMT070208 | |
| DCMT11T304 | |
| DCMT11T308 |
Different chipbreakers:
Grades recommendation:
| YC330 | For finish machining of steel at high speed | CVD coating |
| YC331 | The most versatility grade of steel processing | CVD coating |
| YC332 | For rough machining of steel parts | CVD coating |
Contrast Advantage/Benefits of choosing our carbide inserts:
1. High precision.
Each of our inserts are precision ground and fitting for use on a multitude range of materials and machine tools.
2. High efficiency.
Up to 30% higher productivity and profitability. Achieve higher metal removal rates.
3. High quality.
Good abrasion resistance and toughness.
4. CVD coating.
Coated surface enable to get longer tool life.
Customer’s case: when a insert is failed on performance:
1. Flank Wear
-Workpiece material contains high hardness chemical elements (tool steel, die steel)
Increase cutting speed if abnormal flank wear is caused by a very slow cutting speed.
Solution: Reduce cutting speed or feed rate or use more wear resistant grade
2. Crater Wear
-Workpiece material contains high hardness chemical elements
Solution: Reduce cutting speed or feed rate or use more wear resistant grade
3. Cracking
-Excessive feed rates when interrupted cutting
Solution: Reduce feed rate, Use tougher grade
Quality control:
Technical support and after-sale service:
Our company can providing the following technical service for customers:
1: OEM: Custom fabrication according to your drawings, samples or designs.
2: We are committed to product quality control and quality assurance.
3: Suggsting more suitable model to replace the brands of Japan, Korea and so on.
4. We can offer together with tool holder.
Tool holder:
S08K-SDQCR/L07
S10K-SDQCR/L07
S12M-SDQCR/L07
S16Q-SDQCR/L07
S20Q-SDQCR/L11
S25R-SDQCR/L11
S32S-SDQCR/L11